Sealed Jar Lamp - PIC Project This device uses 2 AA alkaline batteries to power a 1 watt LED. It has 4 power
levels, plus on/off, and can run either side up. The jar light is entirely sealed with no external switches.
An internal mercury switch controls all of the modes of operation. It will work under water. All components
are mounted directly to the circuit board (mouse over image above). A small piece of 1/4 inch board is glued
to the inside of the lid. The circuit board is fastened to this with 2 small wood screws. Nothing penetrates
the lid. . . [Luhan Monat - Mesa Arizona]
Selecting a Processor Reset IC - Application Note Published 20-Dec-02. . . [Microchip]
Selecting an MCP21xx Device for IrDAź Applications - Application Note Published 12-Aug-04. . . [Microchip]
Selecting Input/Output Options on COPS
MicroControllers - Application Note. . . [National
Semiconductor]
Selection of MOSFETs in Switch Mode DC-DC
Converters/ AB-8 - Fairchild App Note - . . .
Self-Programming the PIC18c452 Otp - Application Note Published 6-Apr-01. . . [Microchip]
Sensing Low-g
Acceleration Using the ADXL345 Digital Accelerometer Connected to the ADuC7024 Precision Analog
Microcontroller - Sample code for the I2C
configuration can be found at http://www. analog. com/static/imported-files/circuit_notes/CN0133_Source_Code.
zip. . . [Analog Devices-Circuits from the Lab]
Sensored BLDC Motor Control using DSPic30f2010 - Application Note Published 23-Jun-05. . . [Microchip]
Sensorless BLDC Motor Control Using dsPIC30F2010 - AN992 - Technology Inc. . . [Microchip App Note - last updated on 6-Jun-11]
Sensorless BLDC Motor Control using DSPic30f2010 Chinese - Application Note Published 27-Jul-05. . . [Microchip]
Serial COMMMs to LED Driver - . . . [by Airborn Electronics, Australia]
Serial input 4 Digit Readout - PIC Project This device uses an LTC4625 4 digit LED display (with RH decimal points), along
with 2 extra LED's. It requires only 5 volts, TTL serial input, and Ground on a 3 pin connector. Note: the
connector is mounted with the pins sticking out the back side to allow for mounting flush against a
(transparent) front panel. . . [Luhan Monat - Mesa Arizona]
Serial PIC Tap - This is an educational site of PIC Projects in various stages of development along with
pictures, source files, object code files, schematics, and board layouts. You are welcome to use what you
like at your own risk. . . [Luhan Monat - Mesa Arizona ]
Serial Port Tests Digital Circuits - 06/25/09 EDN Design Idea The circuit in Figure 1 uses a MAX232 IC from to convert RS-232
voltage levels to TTL levels (Reference 1]. A 74HC4051 from Texas Instruments lets you select any of four
digital inputs and route them to the serial port (Reference. . . [by Yury Magda, Cherkassy, Ukraine]
Serial port tests digital
circuits - A PC's serial port provides signal lines
that you can use to read voltage levels of digital circuits. You can use the port to test digital TTL
(transistor-to-transistor-logic) -level circuits. You just need to convert the TTL levels. . . [Yury Magda-Circuit
Designer]
Serial Readout - This is an educational site of PIC Projects in various stages of development along with
pictures, source files, object code files, schematics, and board layouts. You are welcome to use what you
like at your own risk. . . [Luhan Monat - Mesa Arizona ]
Serial to PIC Interface - One of the first things I like to do when creating a new project is to get the I/O working.
This helps in debugging the code as I write it. What about projects that do not have I/O? This device sneaks
both input and output from your computer (terminal program) to the PIC using just one pin. . . [Luhan Monat -
Mesa Arizona]
PAGE Next >>>> |