Electronic Circuits and electronic circuits, electronic schematics plus an extensive resource for hobbyists, inventors and engineers

DiscoverCircuits.com, has 40,000+ electronic circuits, cross-referenced
into 500+ categories.    We have searched the web to help you find quick design ideas.
We make every effort to link to original material posted by the designer. 
Please let us if you would like us to link to or post your design.

HOME Schematics Index Hobby Corner Dave's Circuits Electronic Resources Contact Info
Imagineering Ezine    Discover Solar Energy Dave Johnson & Associates Faraday Touch Switches

Circuits designed by David Johnson, P.E.
Last Updated on: Thursday, April 07, 2016 02:04 PM

Master Category List - Dave's Circuits

Text & Graphics Copyright David A. Johnson, PE - ALL Rights Reserved.
LINKING to Dave's circuits is permitted but DO NOT COPY to your WEB SITE server!

Amplifier -- Main Page          Math Functions -- Main Page
 

AC Peak Detector that is Precise  -  This unique circuit uses a very inexpensive voltage comparator to form a peak detector. The DC voltage produced tracks the positive peak of the input signal.  It works from about ten millivolts to about 10 volts peak to peak.  The maximum frequency is about . . . [Hobby Circuit designed by David Johnson P.E.,  02/11/02]


Acceptable Voltage Indictor  -  I have used this circuit many times in custom test fixtures where a simple go-no go indication was needed.  The circuit can also be used to adjust a particular voltage be within specific high or low limits.  The three LEDs will indicate if the voltage is . . . [Circuit by David Johnson P.E.,  02/09/02]

Battery Charge Current Indicator  -  This circuit turns on a LED whenever it detects at least 25ma of battery charge current . . . [Circuit by David Johnson P.E.,  07/23/06]


Circuit indicates Battery Charging Current  -  Anyone who has ever had a shocking experience on an especially dry day is acutely aware of the kinds of high voltage that can be generated from a simple walk across a carpeted floor. Those same finger to metal sparks can destroy or disrupt sensitive elect . . . [Hobby Circuit designed by David A. Johnson P.E.,  01/23/11]


DC Current Indicator #4  -  The circuit below uses some common components to turn on an LED whenever DC current above a certain level is detected.  The circuit uses a very popular LM393 dual voltage comparator from National Semiconductor and a common 1N4148 signal diode.  The diode . . . [Circuit by Dave Johnson P.E.,  10/16/05]


DC Current Indicator 6  -  The circuit below is a simple way to indicate when DC current is flowing through a wire.  The circuit is designed so it will turn on a LED indicator light, whenever the voltage drop across a shunt resistor exceeds about 0.1 volts.  The value of the resist . . . [Circuit by David A. Johnson P.E.,  10/16/05]


Detect Short Xenon Lamp Flashes  -  This circuit uses a small 2.5mm square photo diode in conjunction with a 100mH coil to detect the short light flashes from a xenon lamp.  The coil makes the circuit immune to normal room lights.  Its 10mv sensitivity can detect light flashes from a range of over 100 feet. . . . [Hobby Circuit designed by Dave Johnson P.E.,  02/15/02]


Flash Detector for Xenon Lamp  -  This circuit uses a small 2.5mm square photo diode in conjunction with a 100mH coil to detect the short light flashes from a xenon lamp.  The coil makes the circuit immune to normal room lights.  Its 10mv sensitivity can detect light flashes from a range . . . [Circuit by David Johnson P.E.,  02/15/02]


Indicate DC Current Flow  -  The circuit below is a simple way to indicate when DC current is flowing through a wire.  The circuit is designed so it will turn on a LED indicator light, whenever the voltage drop across a shunt resistor exceeds about 0.1 volts.  The value of the resist . . . [Hobby Circuit designed by David A. Johnson P.E.,  10/16/05]


Indicates Battery Charge Current  -  This circuit turns on a LED whenever it detects at least 25ma of battery charge current . . . [Hobby Circuit designed by Dave Johnson P.E.,  07/23/06]


Indicator for Acceptable Voltage  -  I have used this circuit many times in custom test fixtures where a simple go-no go indication was needed.  The circuit can also be used to adjust a particular voltage be within specific high or low limits.  The three LEDs will indicate if the voltage is . . . [Hobby Circuit designed by David A. Johnson P.E.,  02/09/02]


Precision AC Peak Detector  -  This unique circuit uses a very inexpensive voltage comparator to form a peak detector. The DC voltage produced tracks the positive peak of the input signal.  It works from about ten millivolts to about 10 volts peak to peak.  The maximum frequency is about . . . [Circuit by Dave Johnson P.E.,  02/11/02]


Version 4 of a DC Current Indicator  -  The circuit below uses some common components to turn on an LED whenever DC current above a certain level is detected.  The circuit uses a very popular LM393 dual voltage comparator from National Semiconductor and a common 1N4148 signal diode.  The diode . . . [Hobby Circuit designed by Dave Johnson P.E.,  10/16/05]


Wide Band Zero Cross Detector  -  This circuit was designed to convert a low Amplitude 40KHz signal into a clean square wave signal.  It will work with inputs as small as 5mv peak-to-peak or as large as 3 volts peak to peak.  The input frequency can range from a few kilohertz to about 150 . . . [Circuit by David A. Johnson P.E.,  02/18/06]


Xenon Lamp Flash Detector  -  This circuit uses a small 2.5mm square photo diode in conjunction with a 100mH coil to detect the short light flashes from a xenon lamp.  The coil makes the circuit immune to normal room lights.  Its 10mv sensitivity can detect light flashes from a range . . . [Circuit by David A. Johnson P.E.,  02/15/02]


Zero-Cross Detector-Wide Band  -  This circuit was designed to convert a low Amplitude 40KHz signal into a clean square wave signal.  It will work with inputs as small as 5mv peak-to-peak or as large as 3 volts peak to peak.  The input frequency can range from a few kilohertz to about 150 . . . [Hobby Circuit designed by David A. Johnson P.E.,  02/18/06]


 

 

Amplifier -- Main Page          Math Functions -- Main Page
 

Find Dave's Circuits by Category
eMail David A. Johnson, P.E. about these circuits



 


HOME Schematics Index Hobby Corner Dave's Circuits Electronic Resources Contact Info
Imagineering Ezine    Discover Solar Energy Dave Johnson & Associates Faraday Touch Switches


 About Us   |  Advertise on DiscoverCircuits.com   |   Report Broken Links  |    Link to DiscoverCircuits.com  |    Privacy Policy

Copyright  2002 - 2015 David A. Johnson & Associates.  All Rights reserved. 
 Linking is ALLOWED but COPYING any content or graphics to your web site is EXPRESSLY PROHIBITED.