Electronic Circuits and electronic circuits, electronic schematics plus an extensive resource for hobbyists, inventors and engineers

DiscoverCircuits.com has links to 45,000+ electronic circuits, cross-referenced
into 500+ categories.    We have searched the web to help you find quick design ideas.

HOME Schematics Hobby Corner Dave's Circuits Electronic Resources Contact Info
Imagineering Ezine    Discover Solar Energy Dave Johnson & Associates Faraday Touch Switches
Welcome to DiscoverCircuits.com - online since 2002

See Media Kit for
Advertising Opportunities

Attention Designers:  Please alert us by eMail if we have linked to sites
where your original material has been copied without your permission.
We will change to the LINK to your site.  
Thank you.

 


Electronic Lock Circuits
Electronic Locks:  #'s - A     B - Z


Last Updated: October 24, 2017 02:54 PM


Links to electronic circuits, electronic schematics, designs for engineers, hobbyists, students & inventors:

Code Lock with ATMEL AVR          -  CodeLock AVR electronic combination lock is realized with Atmel AVR microcontroller AT90S2313 or ATtiny2313.  Program in hex code is 2 kB long.  User code is consisted of 1 to 4 digits.  If you buy the chip than user code is consisted of 1 to 8 digits.  If the code is entered in the correct sequence, then after 1 second the relay and the electric striker (in the door) switch on for 1 second and then switch off again.  User code can be changed via 3x4 matrix keypad.  Keypad for CodeLock can be bought at local electronic shop.  Initial user code (1234) is set up with a jumper.  The jumper must be inserted before the voltage (12V) connection.  The jumper must be removed after 2 beeps (after 5 to 15 seconds).   __

Combination Digital Lock          -  A multiple input combination loack using CMOS counter IC's.  Flexibility and code change is allowed by changing output connections.   __ Designed by Andy Collison

Combination Lock       -  Combination lock are nice to enable alarms, but are useful for controlling a wide range of electric devices.  These software keys can open gates, garages, TV sets, telephones, VCRs, well pumps  In practice this circuit is capable to lock or time all the devices that can be connected to relays.   __ Designed by Projects & Ideas from Nutchip.com

Combination Lock       -  The Circuit Board is Designed to accept 2 types of Drive transistors.  I Used a 2N3906 in this schematic, but for Higher Current Drive for a Solenoid, You can use Various T0-220 PNP types of transistors.  USE ONLY ONE OR THE OTHER, NOT BOTH.  In the Picture, I just put a Resistor and LED, where the Solenoid should go.   __ Designed by G.L. Chemelec

Combination lock        -  Operate your gate or something different by this simple electronic combination lock.  The combination can have a chosen length of numbers or alphabets, and can be changed any time.  The LCD display is optional, the circuit works fine without it.  After entering the correct combination, a relay is operated for the predefined time __ Designed by Peter Jakab

Combination Locks     -  This circuit uses 4013 D-type bi-stable flip-flops (D stands for data).  Each flip-flop has a data input and a clock input.  The voltage applied to the input is transferred to the Q output at the instant when the clock input goes from 0 to 1.  (We say these flip-flops are "edge-triggered".) Switches 1, 2, 3 and 4 are the switches which form the code and any number of "wrong" switches can be connected, in parallel, at the point shown.   __ Designed by © David Hoult

Digital Combination Lock          -  A multiple input combination loack using CMOS counter IC's.  Flexibility and code change is allowed by changing output connections.   __ Designed by Andy Collison

Digital Electronic Lock     -  The digital lock shown below uses 4 common logic ICs to allow controlling a relay by entering a 4 digit number on a keypad.  The first 4 outputs from the CD4017 decade counter (pins 3, 2, 4, 7) are gated __ Designed by Bill Bowden

Digital Keypad Combination Lock         -  This simple circuit is the electronic version of the combination lock.  Using the special purpose LS7220 digital lock IC, the circuit allows a 4 digit combination of your choice to activate a relay for a set period of time.  This relay can then be __ Designed by Aaron Cake

Door lock cancellation switch -  This is the circuit where can open the door of the car even if there be not a key.  The switch that cancels door lock is set up to the car __ Designed by Seiichi Inoue

Electronic Combination Lock  -  This 7-digit combination lock can be easily hard-wired for any combination that you choose.  The circuit uses a 4-bit, divide-by-8 Johnson counter (IC1), ten pushbutton switches and npn transistor T1.  At power-‘on,’...___ Electronics Projects for You

Electronic combination lock based on PIC         -  This is my electronic combination lock to use with an outdoor gate.  The functionality is implemented in software.  It turns on a relay (usually to open a door) for a few seconds.  Uses a PIC16F84A.   __ Designed by Peter Jakab

Electronic Combination Lock with AVR    -  CodeLock AVR electronic combination lock is realised with Atmel AVR microcontroller AT89C2051 or AT90S2313 or ATtiny2313 or ATtiny45.  Program in hex code is 2 kB long.  One user code (Ver.1) is consisted of 1 to 8 digits.  One user code (Ver.2.1, 2.2, 2.3) is consisted of 1 to 4 digits.  If you buy the chip (Ver.2.1, 2.2, 2.3) than you can enter 1 or 8 user codes that are consisted of 1 to 9 digits. 
 __

Electronic Lock  -  The digital lock shown below uses 4 common logic ICs to allow controlling a relay by entering a 4 digit number on a keypad.  The first 4 outputs from the CD4017 decade counter (pins 3, 2, 4, 7) are gated __ Designed by Bill Bowden

Electronic Lock  -  This is a simple but efficient Electronic lock.  This lock can be used to protect any electronic systems from unauthorized usage.  To get access the uses needs to know 8 digit pass-code or password.  When the user enters correct 8 digit password followed by "Enter" button, it activates the relay allowing access to the system controlled by relay.  If the 8 digit pass-code is incorrect, after pressing "Enter" button, the circuits reset's itself without turning the relay on. __ ` Sigmatone

Electronic Locker         -  This circuit is an Electronic Locker.  It is controlled by a switches combination (by a code).  There is a switch matrix on the door of the locker.  This one is a unit of switches connected into 4 arranged of 4 columns for a total of eight terminals __

Electronics Card-Lock SystE - M     -  The circuit presented here can be used as a lock for important electronic/electrical appliances.  When card is inserted inside its mechanism, depending upon the position of punched hole on the card, a...___ Electronics Projects for You

Enhanced 5 Digit Alarm KeypA - D -  This is an enhanced 5 digit keypad which may be used with the Modular Alarm System.  This switch will suit the Modular Burglar Alarm circuit.  However, it also has other applications.  The Keypad must be the kind with a common terminal and a separate connection for each key.  On a 12-key pad, look for 13 terminals.  The matrix type with 7 terminals will NOT do.  Choose the five keys __ Designed by Andy Collison

Infrared gate 2  -  This is an infrared gate with two sensors planned to use in the wall in the way behind a door.  It can be applied in a toilet to keep track of that someone is inside exceeding a certain amount of time.  After that time elapsed, the circuit triggers the digital output wich can turn on a ventillator.  The time period the output is turned on can be separately controlled by a second timer. __ Designed by Peter Jakab

KeyLock          -  Press four keys in specific order, and relay will turn on for about to 5 seconds and that is it.  But first you must memorize your code following this way: press and hold button (button on pin 3) , so long until Led goes ON.  Now, when.   __ Designed by © Ivica Novakovic

Keypad Combination Lock             -  A digital combination lock using a push button keypad.  The combination can be changed and the lock has an entry delay.   __  Designed by Andy Collison

One-button lock provides high security -  03/04/99 EDN-Design Ideas (contains several designs, scroll to find this one)   Figure 1 is the block diagram of an easily programmed, single-button combination lock.  You operate the lock by using a series of short and long pulses from a momentary switch that masquerades as a doorbell button.  The circuit uses inexpensive CMOS logic.  The retriggerable timer, T1, locks out entries made after the T1 code-entry window, thereby greatly enhancing security.  The circuit in Figure 2 operates as follows: The Schmitt-trigger quad NAND gate, IC1, debounces the code-entry switch and, with the aid of simple analog circuitry, produces separate outputs for activation times of less than and more than 0.3 sec.  These outputs connect to the select gate, IC5__ Circuit Design by Maxwell Strange, Fulton, MD

PIC16F84-Electronic door codelock      -  This is my electronic combination lock to use with an outdoor gate.  The functionality is implemented in software.  It turns on a relay (usually to open a door) for a few seconds.  Uses a PIC16F84A.   __ Designed by Peter Jakab

Programmable Digital Code Lock          -  A programmable code lock can be used for numerous applications in which access to an article/gadget is to be restricted to a limited number of persons.  Here is yet another circuit of a code lock employing mainly the CMOS ICs and thumbwheel switches __

Remote Door Lock      -  Recently, many cars are equipped with Remote Car Door Controller called Keyless entry.  On this page, I will introduce the equipment which changed a remote control for the engine start into the door lock __ Designed by Seiichi Inoue

Simple Circuit combination lock -  This experiment may be built using only one 8-position DIP switch, but the concept is easier to understand if two switch assemblies are used.  The idea is, one switch acts to hold the correct.   __ Designed by © EETech Media, LLC.

Simple Circuit Electronic 'Lock'    -  There are six (or more) push switches.  To 'unlock' you must press all the correct ones at the same time, but not press any of the cancel switches.  Pressing just one cancel switch will prevent the circuit unlocking.  When the circuit unlocks it actually just turns on an LED for about one second, but it is intended to be adapted to turn on a relay which could be used to switch on another circuit.  Most relays cost about £2 to £3 extra __ Designed by John Hewes

Single-button lock provides high security         -  03/04/99 EDN-Design Ideas (contains several designs, scroll to find this one)   Figure 1 is the block diagram of an easily programmed, single-button combination lock.  You operate the lock by using a series of short and long pulses from a momentary switch that masquerades as a doorbell button.  The circuit uses inexpensive CMOS logic.  The retriggerable timer, T1, locks out entries made after the T1 code-entry window, thereby greatly enhancing security.  The circuit in Figure 2 operates as follows: The Schmitt-trigger quad NAND gate, IC1, debounces the code-entry switch and, with the aid of simple analog circuitry, produces separate outputs for activation times of less than and more than 0.3 sec.  These outputs connect to the select gate, IC5__ Circuit Design by Maxwell Strange, Fulton, MD


Electronic Locks:  #'s - A     B - Z

 


Imagineering Ezine    Discover Solar Energy Dave Johnson & Associates Faraday Touch Switches



 About Us   |  Advertise on DiscoverCircuits.com   |   Report Broken Links  |    Link to DiscoverCircuits.com  |   
Privacy Policy


Discovercircuits.com endeavors to credit original designers.   Please alert us by eMail so we can
delete links to material that have been copied without your permission
.   Thank you.


© Copyright of all original material on this website is the property
of David A. Johnson, P.E. (Dave Johnson & Associates ) unless otherwise noted.  

Linking is ALLOWED but COPYING any content or graphics to your web site is EXPRESSLY PROHIBITED.
All material is provided "as is" without guarantees or warranty of any kind, either expressed or implied.