|
Remote TV Camera Power - A while back I received an email from a company with a problem. They needed a security camera installed at some remote location. The camera was a high quality color camera sending out standard NTSC video through a long 500 foot 50 ohm coax cable. With some difficulty they got the coax strung. They were told that there would be AC power near the camera location to power that device. But, they then learned that in fact, there was no power available. They thought about using a solar panel and a battery but they decided to call me for help instead. Was there some way to power the camera without stringing another cable? . . . Hobby Circuit designed by David Johnson P.E.-July, 2011 RGB Color Detector using TCS3200 Sensor Module - This is a simple color sensor using Arduino Uno R3 and TCS3200 color sensor module. it can be useful for color identification and detection for food-processing units, color printer applications, paint-mixing...__ Electronics Projects for You
RGB Colour Generator - Presented here is a red, green and blue (RGB) colour generator using AT89C2051 microcontroller (MCU). This is a simple and low-cost circuit for a multiple colour generator that can be built...__ Electronics Projects for You
RGB LED - Lets have some practice and write simple AVR LCD menu routine. For this we need to write LCD control library. I decided not to use one from AVRLiB. LCD controlling isn't difficult just a few lines of code unless you want to make it more universal__
RGB LED colour wash light - This PIC based circuit uses Red, Green and Blue high brightness LEDs that are pulse width modulated (PWM) to vary the intensity of each colour LED. This allows effectively any colour to be generated. The circuit is designed to fit into a low voltage Halogen light fitting. A look up table is used to program__
RGB LED Showcase Light - RGB LEDs are capable of generating a variety of colours by mixing red, green and blue colours. it is sometimes very interesting to replace single-colour LEDs and produce different colour combinations...__ Electronics Projects for You
RGB Mood Lamp - On this page I will explain how I created my own colour changing lamp with red, green and blue LEDs that fades between all colours of the rainbow. it really comes out well at night when other light are dimmed. in daylight conditions the colors aren't noticed well__
RGB pattern generator based on an Atmel ATtiny2313 running at 20MHz - This is a pattern generator with 13 images and 1KHZ tone, good for testing LCD TV’s, projectors and cathode ray tube TV’s. The project is based on ATtiny2313 running at 20MHZ. The horizontal frequency is 15625HZ and the vertical frequency is 50HZ (Europe standard). __ AVR Projects Dim
RGB Synchronizing Fireflies - The author was triggered to propose this circuit to Elektor following the publication of Fun with Fireflies in the April 2010 edition. The version shown here employs an ATtiny13 microcontroller and just one RGB LED and should be cheap and easy to build in large numbersmust register on this site __ Designed by Published in Elecktor July/Aug, 2010
S Video to Composite Video Adapter - This simple adapter can be used to convert Y/C video (S-video) to a composite video. This adapter is useful in cases where your video output device has only S-video output but your signal source accepts only composite video input. This circuit works with both PAL and NTSC video standards. __ Designed by Tomi Engdahl
Samsung Protect Circuit With La76931 - Following is the protect circuit Samsung TV which use IC LA76931 as basic working the protect circuit. This Protect Circuit LA76891 located at pin-30 whichconnected to the collector of transistor Q902.in normal conditions the voltage at the base of Q902 is “low” and the voltage at pin-30 is “high”. For the temporary crippling protect, it can be__
Send Color Video 1000 Feet over Low Cost Twisted-Pair - DN65 Design Notes__ Linear Technology/Analog Devices
Simple Video Amplifier - There are times when you want to view the video clips taken by your camera on your TV. You can do so by interfacing the video output of the source device...__ Electronics Projects for You
Simple Circuit Motion Detecting camera using PIR passive infrared - A simple automatic motion-detection Digital Camera. __ Designed by Collin Mitchell
Simple Circuit TV Video Modulator - Schematic only __ Designed by va3iul
Simple Circuit VGA/Video adapter - This project is about creating VGA/Video signals using the 8-bit AVR MCU. The output can drive a TV set or a VGA monitor. __ © Vassilis Serasidis
Simple Circuit VHF video transmitter / video Modulator (not FCC approved) - Schematic only __ Designed by Peter Jakab
Small TV transmitter for CCTV observation - Circuit diagram only __ Designed by Jack Donio
STV9380 And STV9381 Vertical Efficient - STV9380 and STV9381 is a vertical ic-out which very efficient, so it does not require cooling (heat sink) as the vertical IC is generally. This circuit works the same way as most other vertical ic, except at the amplifier end only. Amplifier section works at the end of class D (this is different to the generally vertical__
Superimposer - This is a video superimposer (titler) like above. its resolution is 512x240 dots, monochrome, so that it can displays KanjI characters. it is designed using only conventional parts. __ Designed by The Electronic Lives Manufacturing-presented Chan
S-video to composite video adapter - This simple adapter can be used to convert Y/C video (S-video) to a composite video. This adapter is useful in cases where your video output device has only S-video output but your signal source accepts only composite video input. This circuit works with both PAL and NTSC video standards. __ Designed by Tomi Engdahl
S-video to composite video converter - Some digital TV set-top boxes provide only S-video and component video outputs, which can pose a problem if your TV set only has a composite video input - or you've used up the S-video and component video inputs. The same can happen with video tuner cards for PCs. Here's an easy-to-build adapter to get you out of trouble.__ SiliconChip
Sync Separator Includes AGC - 05/11/95 EDN Design Ideas: This sync separation circuit has a gain-control circuit that helps to stabilize the sync-separation function Design by Dana Romero, Salt Lake City, UT-- 05/11/95
Synchronous Oscillator Converts Audio, Video to FM - 07/22/99 EDN Design Ideas: The synchronous oscillator (SO) and the coherent phase-locked synchronous oscillator (CPSO) are universal multifunctional networks that track, synchronize, and amplify as much as 80 dB; improve SNR by as much as 70 dB; and modulate AM, FM, and FSK signals Design by Vasil Uzunoglu, Synchtrack, Gaithersburg, MD |
